Cool! ...thanks for reporting back.
rogerX
--- In simplycomputers2@yahoogroups.com, "Shephird" <tidings_@...> wrote:
>
> Ohhh.. After removing and installing the printer and other devices.
> Finally I made this change to correct the USB conflict problem.
>
> I removed one of the USB devices connected to the tower.
> I replaced it with the USB card reader.
>
> Then I hooked up this removed USB device to the USB card reader
> (which has 3 USB port - as a hub)
>
> All worked well hany dandy.
> Fred
>
> --- In simplycomputers2@yahoogroups.com, Tidings_ <tidings_@> wrote:
> >
> > Good idea..
> > The Maxtor External Hard drive comes with 2 cables connected to it
> > Thanks for your reply.
> > Fred
> >
> >
> >
> >
> > See if there are newer drivers for your USB camera at their website.
> >
> > Other than that, an error like this just might be coincidental .. .it might not be the camera at all.
> >
> > Why does the external hard drive need two USB cables?
> >
> > You can try just moving the camera to the hub, and the printer to the computer directly (etc.)
> >
> > Or just go into Device Manager and remove all the listings under USB controllers and reboot ... Windows will rebuild the list.
> >
> > rogerX
> >
> > --- In simplycomputers2@yahoogroups.com, Tidings_ <tidings_@> wrote:
> > >
> > > I have a powered 4 port D-Link USB hub on Pen Dual core winxp sp3
> > >
> > > Connected to the hub are:
> > > Canon Printer
> > > External 80GB HDD with 2 cables
> > > TV tuner
> > >
> > > Connected to the PC USB are:
> > > Mouse
> > > Web Camera
> > >
> > > Recently I purchased an MSI SD card reader and hooked it to the last USB
> > > port on the front of the pc tower.
> > >
> > > The system keeps rejecting one of the USB hooked to the PC and that is the web camera.
> > >
> > > With the following error: One of your USB device has bounce.
> > > Translation.. the web camera is always bounced out and is not recognized.
> > >
> > > Any explanation to that.
> > > Your help will be greatly appreciated.
> > >
> > > Fred
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
http://tech.groups.yahoo.com/group/simplycomputers2
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.