Although it sees the DVD and I can make it the first boot device, it
will not work.
The computer checks memory, It will display attached drives, then stop.
The screen goes blank.
I have checked through the bios for anything that would change the
behavior. I have the install guide from online.
DragonFly
On 11/26/2011 1:23 PM, Bill Aycock wrote:
> Is there an Operating system on the Drive? If not, you should change the
> first boot drive to the CD and use an OS installation CD (or DVD) to get it
> going. However, any other "Bootable" CD will serve as a test.
> Bill--W4BSG
>
> ----- Original Message -----
> From: "kennp89" <fastdragonfly@gmail.com <mailto:fastdragonfly%40gmail.com>>
> To: <simplycomputers2@yahoogroups.com
> <mailto:simplycomputers2%40yahoogroups.com>>
> Sent: Saturday, November 26, 2011 11:47 AM
> Subject: [Simply Computers] Intel D915GAV Won't Boot
>
> > I'm putting together a computer for a friend. For some reason it won't
> > boot to a drive.
> >
> > It is an Intel D915GAV motherboard. I have verified that the CPU and RAM
> > are the right type.
> >
> > I am able to get into the bios. It sees the drive, CPU and RAM. It also
> > sees the DVD RAM when its plugged in.
> >
> > With no drives it does not give the "No boot devices"
> >
> > The drive is listed as the 1st boot device.
> >
> > When I let it boot normally, there is a beep when it would normally load
> > from the drive, then a blank screen.
> >
> > Is there anything I can try? I thought RAID but there does not seem
> to be
> > any settings.
> >
> >
> > DragonFly
> >
http://tech.groups.yahoo.com/group/simplycomputers2
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.