Happy to hear Mike
Good luck
Best Regards
Vijay.
On Sat, Nov 5, 2011 at 11:37 PM, mgandtherays <mgwiz@tampabay.rr.com> wrote:
> **
>
>
> Vijay and All:
> GOT IT!, Thanks.
> There's no configuring I can access on the AASTRA IP phone itself (so no
> point really in checking those anyway...)
> The fix was found by trial-and-error fiddling w/ the Linksys Router
> 'Application & Gaming' settings.
> On the DMZ page i Enabled the IP address of the phone (which is different
> at home through the router than it is in the office).
> On the QOS page I Enabled QOS, selected 'Manual' for Upstream bandwidth
> control w/ the highest possible number. Also on QOS page in 'Device
> Proirity' area entered SIP1 with the AASTRA phones MAC address and gave
> 'High' proirity, In Ethernet Port area gave again High proirity to the
> specific port that the phone is plugged into (w/ Flow control and imcoming
> rate limits both Disabled), and in Application Priority area entered v_sip1
> and v_sip2 w/ specific ports 5060 and 5061 both w/ High proirity.
> Phone works now inbound and outbound, and I can do everything else I want
> at the same time. NO chop, no packet-loss or drop outs.
>
> mike
>
> --- In simplycomputers2@yahoogroups.com, vijay panchapakesan <vijaykwt@...>
> wrote:
> >
> > Dear Mike,
> >
> > for more details to check the configuration details of your phone,
> > please go through the following link.
> >
> > http://www.voiptalk.org/products/aastra-6730i-voip-phone-setup
> >
> > verify all the configurations,
> > i suspect there must be some misconfiguration in outbound proxy
> > configuration.
> >
> > Best Regards
> > Vijay.
> >
> > On Fri, Nov 4, 2011 at 4:16 PM, vijay panchapakesan <vijaykwt@...>wrote:
>
> >
> > > Dear Mike,
> > >
> > > based on your input, i understand that your router not blocking
> anything,
> > > as i mentioned before did you double check the sip configuration ?
> > > please double check the following parameters
> > >
> > >
> > > > > *Screen Name* & *Screen Name 2*:
> > > > > *Phone Number*
> > > > > *Caller ID*:
> > > > > *Authentication Name*:
> > > > > *Password*:
> > > > > *Proxy Server*:**
> > > > > *Proxy Port*: **
> > > > > *Outbound Proxy Server*: **
> > > > > *Registrar Server*:**
> > > > > *Registrar Port*:**
> > >
> > > if the parameters are right, then l need more details on ip address
> > > configuration
> > > please get me back once you verified the settings.
> > >
> > > Best Regards
> > > Vijay.
> > >
> > >
> > >
> > >
> > > On Fri, Nov 4, 2011 at 7:54 AM, mgandtherays <mgwiz@...>wrote:
> > >
> > >> **
>
> > >>
> > >>
> > >> Vijay:
> > >> Thanks. You seem to be the only person who fully understands the
> question
> > >> and issue...
> > >> Router softward configs doesn't read 'firewall.'
> > >> Under the 'security' tab i have 'filter' and 'VPN Passthrough.'
> > >> In 'Filter' tab i have choices to 'Filter IP Address Range,' or
> 'Filter
> > >> Port Range' or 'Filter MAC Address.' I have nothing filtered. Under
> 'VPN
> > >> Passthrough' tab I have options to enable or disable 'IPSec
> Passthrough',
> > >> 'PPPoE Passthrough' , and 'PPTP Passthrough.' All three of these are
> > >> 'Enabled.'
> > >> mike
> > >>
> > >>
> > >> --- In simplycomputers2@yahoogroups.com, vijay panchapakesan
> <vijaykwt@>
> > >> wrote:
> > >> >
> > >> > Dear Mike,
> > >> >
> > >> > i got a suggestion for you.
> > >> > since you said inbound doesn't have any problem and outbound is not
> > >> working.
> > >> >
> > >> > First double check the sip configuration.
> > >> >
> > >> > > *Screen Name* & *Screen Name 2*:
> > >> > > *Phone Number*
> > >> > > *Caller ID*:
> > >> > > *Authentication Name*:
> > >> > > *Password*:
> > >> > > *Proxy Server*:**
> > >> > > *Proxy Port*: **
> > >> > > *Outbound Proxy Server*: **
> > >> > > *Registrar Server*:**
> > >> > > *Registrar Port*:**
> > >> > >
> > >> > > whatever port numbers you have configured should not be blocked by
> > >> > > your router firewall. else best option is disable firewall in
> router.
> > >> > >
> > >> > > Please note your router ip address is the gateway ip for your
> IPphone.
> > >> > >
> > >> > > Hope this helps.
> > >> > >
> > >> > > Best Regards
> > >> > > Vijay.
> > >> > >
> > >> >
> > >> > On Wed, Nov 2, 2011 at 8:44 AM, RogerX19 <helpmeroger@> wrote:
> > >> >
> > >> > > **
> > >>
> > >> > >
> > >> > >
> > >> > > Hello,
> > >> > >
> > >> > > Sounds like you need to enable it in your firewall. You didn't
> tell us
> > >> > > what OS you're running, so can't give exact help in that respect.
> > >> > >
> > >> > > But this is a rather specialty product .. you might find more
> specific
> > >> > > help at the User Support Forum at the AASTRA website.
> > >> > >
> > >> > > Probably lots of people have had this problem before, and fixed
> it.
> > >> > >
> > >> > > rogerX
> > >> > >
> > >> > >
> > >> > > --- In simplycomputers2@yahoogroups.com, "mgandtherays" <mgwiz@>
> > >> wrote:
> > >> > > >
> > >> > > > AASTRA 6730i IP phone.
> > >> > > > Linksys BEFSR41 (vers 4.1) wired router.
> > >> > > > Brought home the IP phone so i can make calls from my home
> office
> > >> and
> > >> > > have all the features as I would have while in the office, receive
> > >> calls,
> > >> > > transfer, etc. I am able to receive inbound calls on the phone,
> but am
> > >> > > unable to phone out with it.
> > >> > > > There must be some port / gateway / address I need to 'open'
> that
> > >> i'm
> > >> > > not able to idenfity... or something that I have to disable. The
> > >> router has
> > >> > > the latest (and only available ) firmware update. The 39 page user
> > >> guide
> > >> > > that accompanies the Linksys BEFSR41 router nowhere addresses IP
> > >> phones --
> > >> > > i'm guessing IP phones were not that prevalent when this router
> was
> > >> > > produced. When a friend phoned on a 'test' call he was able to
> hear
> > >> every
> > >> > > word I was saying, and I was able to hear every word he was
> saying,
> > >> there
> > >> > > are no dropouts or packets-lost. Clarity both ways -- so i've got
> > >> enough
> > >> > > bandwidth. I just need to get the right 'door' opened...
> > >> > > > Thanks, mike
> > >> > > >
> > >> > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >> > [Non-text portions of this message have been removed]
> > >> >
> > >>
> > >>
> > >>
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
[Non-text portions of this message have been removed]
http://tech.groups.yahoo.com/group/simplycomputers2
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.