OoooKKkkkkay
If you want help with HiJackThis here's what you do:
Run the HJT program and save a log file.
Open the log file and use Edit | Select All
Then (still in the log file) Edit | Copy.
Now hit Reply to this message and at the top type in something (like,
"Hi") then, using your keyboard, press Ctrl - V (that is, you hold
down the Ctrl key and press and release the letter "v"). The log file
contents should now be in your email.
Go ahead and post your reply then we'll help you with just this. But
I remember, and it's at the bottom of this post, that you had a
keyboard, login, continuos scrolling "it doesn't work anymore"
problem. You're now saying the keyboard is fixed? Is this correct?
Yours,
...Bryce
At 10:55 PM 9/30/2011, you wrote:
>Ok. Well what I did come back to list for was help identifing
>whats in my hijack this log file,I have it who could take a look and
>let me know :-) ?. yes there are some other things going on. Also
>fyi, I had some odd keyboard functionig last month and did a restore
>and it seemed repaired. My restore now does not show past a few
>weeks now. I also recently connected a wifi adapter to the usb port.
>It seem to have a few problems( I thought)loading the disk but I
>guess it evetually just worked. not long after this the problems
>seem to have started. I uninstalled the usb wifi program.
>--- In
><mailto:simplycomputers2%40yahoogroups.com>simplycomputers2@yahoogroups.com,
>B Welkin <welkinator@...> wrote:
> >
> > I am sure no one here understands what your Subject line has to do
> > with the multiple problems you present.
> >
> > BUT... to help better please quote EXACTLY the bootup message that
> > you refer to as "something about reatec".
> >
> > In addition, if you have a keyboard problem, which is where I >think<
> > this thread started, AND if you will post your laptop model number,
> > Ardell or others will give you help in fixing that. Which might then
> > be the cure to the login scrolling.
>
> >
> > At 01:46 PM 9/30/2011, you wrote:
> > >
> > >
> > >I forgot to mention,start up has changed .when booting up it says
> > >something about realtec and then it asks what system I want to use
> > >but only offers vista which I have then gets to password and it is
> > >srolling ****. I have to backspace it out and enter password. ???
> > >
> ><mailto:simplycomputers2%40yahoogroups.com><mailto:simplycomputers2
> %40yahoogroups.com>simplycomputers2@yahoogroups.com,
> > >"Bill Aycock" <billaycock@> wrote:
> > > >
> > > > Ardell- The Satellite Laptop is a Toshiba, and replacing the
> > > Keyboard is not simple. It looks like a cleaning job is needed.
> Or--can he use a USB substitute?
> > > >
> > > > From: "Ardell Faul" <ardell@>
> > > >
> > > > > You probably have stuck key, most likely the "n" key. At log on, you
> > > > > can try tapping it until the scrolling stops, then
> backspace until you
> > > > > can use the On Screen keyboard. But in the long run, you will have to
> > > > > replace it. This is usually not difficult to do if you have a small
> > > > > phillips screwdriver. Just go to Ebay and look up your model number
> > > > > followed by the word keyboard and you will find one.
> > > > >
> > > > > On 9/30/2011 9:53 AM, vibroman7 wrote:
> > > > >> I just had the strangest problems occur lately,and now
> barely limping
> > > > >> by. The letter n will not work, I had to use o screen keyboard. On
> > > > >> password log in it just scrolls ****** across it. On boot up it, it
> > > > >> doest work correctly any more. I have a satelite laptop with
> > > > >> vista.Please need help,thanks.
[Non-text portions of this message have been removed]
http://tech.groups.yahoo.com/group/simplycomputers2
0 comments:
Post a Comment
Note: Only a member of this blog may post a comment.